There are many suggestions for assistance when it comes to carpet spot and stain removal. Some stains can be more challenging than others, but there are many effective treatments shared on the web. There are some hazy areas that need to be addressed, though the steps are usually straight forward. Considering this, we at the Heart of Texas Chem-Dry would like to share the steps that need to be avoiding while treating carpet stains and spots.
Avoid Over Wetting Carpet
Generally, the spilled substances that land on carpets have some moisture content. Also, increasing the oversaturation, the liquid cleaning solution frequently requires repetitive steps to remove the stain completely. With the high moisture levels, you are inviting mold and mildew problems while likely causing water damage to the carpet, carpet pad, and even the subfloor. To prevent oversaturating, make sure to initially remove excess moisture from the spot before treating it and have dry paper towels, cloths, or rags on standby to blot moisture in between cleaning solution applications.
Don’t Rub & Scrub Old Carpet Stains
Attacking stains and spots is a natural impulse when trying to erase them from the carpet’s surface. With rubbing and scrubbing techniques, the circumstances are worsened. Due to pressure and motion from scrubbing and rubbing techniques the substances are spread out further and deeper into the carpets. When you treat the spots and stains, start blotting the exterior of the stain and work your way to the center. Starting at the outer rim and going inward is ideal to control the spot as the blotting action lifts the stain.
Treating Carpet Stains with Hot Water is a Mistake
In many treatments, water is a main element that remove stains and spots. Warm or cool water use is usually specified. Stick to cool water to avoid making a spot permanent if there is uncertainty. Keep in mind, hot water will set in the stain, much like when washing and drying stained clothes.
Always Rinse & Dry Carpet Stains After Treating
After the stain is lifted, there is more to do. When you leave behind residual cleaning substance, dirt and debris are magnetized to the area. To ensure the area is clear, use a water-damp cloth and blot residual cleaners from the surface. Dry the area as best you can after the area is rinsed. With a dry cloth or towel, start by blotting the excess moisture. Leave a dry towel that is weighted down overnight on the surface. Vacuum the are once you are sure the area is dry.
Don’t Neglect the Carpet Patch Test
Even if you have used a cleaner or remedy in the past as the patch test is a vital step, you want to make certain there is no damage to the carpet. Usually, the cleaning chemicals can lighten the carpets, but some break down the fibers. Select an inconspicuous area for a patch test every time you treat the carpets.
Using Dyed / Printed Cleaning Cloths Can Make Carpet Stains Worse
It is crucial that you use plain white cloths, rags, paper towels, and towels. Utilizing any dyed or printed cleaning aids can be easily transferred to the carpet can easily create a stain on top of a stain. To avoid this predicament, only use plain white cleaning aids.
Carpet Cleaning, Stain Removal & More in Waco, Dallas, Harker Heights, Cedar Park, Allen & the State of Texas
Whether you are dealing with stains and spots, are wanting to invest in a deep cleaning carpet cleaning maintenance service, the professionals of Heart of Texas Chem-Dry is readily available to assist you. Contact us today!
